What is a PVC edge banding?
PVC, full name Polyvinylchlorid, the main ingredients of PVC, polyvinyl chloride resin is the main raw material, adding an appropriate amount of anti-aging agent, modifier, after mixing, calendering, vacuum forming and other processes made materials. PVC material can be divided into soft and hard material PVC.
PVC edge banding can be classified according to their shape and flat shaped PVC edge banding edge banding. Flat edge of the kitchen is mainly used in furniture, teaching equipment, laboratories, doors, decorative and other industries. Mainly used not used for particleboard, MDF solid cross-section of the seal, play shut up, decoration, to prevent the sheet itself contains harmful volatile gases, such as to prevent the board by the water damage and other unfavorable factors. Flat edge of the common specifications, generally ranging from 0.5 ~ 3mm thickness, width 9 ~ 180mm range. Width depends on the determination of the thickness of the sealing plate, generally more than 3 ~ 4mm plate can be. More than a few mm trimming the main to provide margin. Thickness of the major decisions based on the actual needs of customers, thicker edge effect is more obvious, the more angles the better grades. However, the higher the thickness of the thicker, which means the use of cost increases. Shaped edge of the shape is different from the flat, wide and thick, like a regular flat to be found, each with a different shape. Shaped the development of the major needs of the customer's actual use of special development. Shaped mainly used in furniture, doors, cars, trains, chairs, etc., played shut, decoration and so on. Because generally flat shaped heavy-weight ratio, the output is not high, the production process more cumbersome and other reasons, the price much more expensive than flat.
PVC edge banding can be divided into its colors, plain PVC edge banding, wood, PVC edge banding. Plain, is the everyday life of the red, yellow and blue, green, etc., can be called plain, that is, the meaning of a single color. Over the upper end of the bottom of PVC plastic material, plain Edge board first with a relatively simple, white plate on the selection of the edge of the white, and so on. General color with a difference, so in tune color, manufacturers will generally require customers to provide on behalf of the base color (such as the sample plate, plates colored cards, etc.). Wood color is to paint the surface with paint and India, to form lines similar to the effect of veneer. Wood color, the middle layer of PVC substrate, the surface for paint printing, the bottom of the bottom plastic. Edge of wood color slightly higher price than plain.
PVC edge banding material by the raw materials they use, they can be divided into ordinary Edge, environmentally friendly PVC edge banding. Environmental protection and environmental protection can not feel and do not touch, vision to identify, must go to authoritative department. Edge of the national production companies a lot, but can produce environmentally friendly is not a lot.
